LilyPad

LilyPad Buzzer

DEV-08463 This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusively loud.

LilyPad ProtoSnap Plus Kit

SparkFun Large Parts Box - LilyPad (Magnetic)

LilyPad Sewable Electronics Kit Guidebook

LilyPad E-Sewing ProtoSnap Kit

LilyPad ProtoSnap Plus Lab Pack

LilyPad E-Sewing ProtoSnap

LilyPad Sewable Electronics Kit - Special Edition

LilyPad Light Sensor

DEV-08464 This is a simple to use light sensor that outputs an analog value from 0 to 5V. With exposure to daylight, this sensor will output 5V. Covering the sensor with your hand, the sensor will output 0V. In a normal indoor lighting situation, the sensor will output from 1 to 2V.

LilyPad Tri-Color LED

DEV-08467 Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color. Very bright output. This is a common anode design - to turn on a channel you simply need to ground one of the R/G/B pins to illuminate that channel.

LilyPad Button Board

DEV-08776 We designed this board to give the user a low profile button without any sharp edges. Button closes when you push it and opens when you release (momentary push button).

LilyPad Temperature Sensor

DEV-08777 Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to digital conversion on the signal line will allow you to establish the local ambient temperature. Detect physical touch based on body...