Login/Opret dig Din kurv
 

Produktet er tilføjet til din kurv.

Total produkter (eksl. moms)
Levering (eksl. moms) Gratis!
I alt (eksl. moms)
Forsæt indkøb Forsæt til betaling

LilyPad

LilyPad Design Kittet indeholder alt til mindst seks forskellige forsøg, der kan syes på tøj. Lysdioder kan aktiveres med bevægelse, og der kan afvikles programmer ud fra sensordata og meget mere. Der er trin-for-trin instruktioner til nybegyndere.
Med LilyPad Design Kit komponenter kan eleverne få et godt indblik i, hvordan elektronik kan tænkes ind i tøjdesign.

Hippomini er med til at skabe rammerne for elevernes digitale og kreative udvikling ved at afholde workshops vedr. nye digitale produkter, så lærerne hurtigt kan begynde at bruge og få glæde af dem. Book en workshop ved at ringe til os på 3316 3317 eller skrive til hello@hippomini.dk


Få inspiration fra vores nyeste katalog om Digitale Produkter til Skolen. Kataloget er ikke en facitliste men "højdepunkter" fra den digitale verden.

Grid List

LilyPad Buzzer DEV-08463

LilyPad Buzzer DEV-08463

DEV-08463 This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusively loud.

Pris

DKK 34,00

LilyPad Light Sensor DEV-08464

LilyPad Light Sensor DEV-08464

DEV-08464 This is a simple to use light sensor that outputs an analog value from 0 to 5V. With exposure to daylight, this sensor will output 5V. Covering the sensor with your hand, the sensor will output 0V. In a normal indoor lighting situation, the sensor will output from 1 to 2V.

Pris

DKK 34,00

LilyPad Arduino USB - ATmega32U4 Board DEV-12049

LilyPad Arduino USB - ATmega32U4 Board DEV-12049

DEV-12049 The LilyPad Simple just got a whole lot… simpler. We’ve updated the Simple board to create the LilyPad USB by replacing the classic ATMega328 with the new ATMega32U4. Not only does that mean that it’s running a variation of the latest and greatest bootloader, but it also means no more FTDI Basic! The only extra piece of hardware you need to...

Pris

DKK 215,00

LilyPad Simple Power DEV-11893

LilyPad Simple Power DEV-11893

DEV-11893 The LilyPad Simple Power is a simple e-textile board that lets you connect and charge a lipo battery and switch it on or off, that’s it! We provide you with a JST connector and a slide switch, you supply the battery and sewing skills! With this LilyPad Simple Power, you should find no trouble in added a bit of power to your next wearable circuit.

Pris

DKK 86,00

Firefly Jar Kit KIT-11833

Firefly Jar Kit KIT-11833

KIT-11833 Are you looking for a fun and simple e-textiles project? The Firefly Jar Kit is a great project for anyone from beginners to experienced e-textile hackers.

Pris

DKK 172,00

LilyPad Lab Pack LAB-11762

LilyPad Lab Pack LAB-11762

LAB-11762 The ProtoSnap LilyPad Development Board is a good way to introduce and explore e-textiles. This LabPack includes everything you need to get students programming and sewing their own LilyPad creations.

Pris

DKK 5.175,00

SparkFun Parts Box - LilyPad (Magnetic) TOL-11640

SparkFun Parts Box - LilyPad (Magnetic) TOL-11640

TOL-11640 When you’re working with e-textiles, you have a tendency to collect a lot of small parts: LilyPad boards, bobbins, needles, the tools of the trade. Why not pick up a sturdy little box to keep your bits and pieces off the floor? This LilyPad branded box is made from rigid cardboard printed with a fancy tone-on-tone pattern and LilyPad logo. There...

Pris

DKK 34,00

LilyTwinkle ProtoSnap DEV-11590

LilyTwinkle ProtoSnap DEV-11590

DEV-11590 The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single board, which makes it easy to explore the possibilities of the components before snapping them apart and building them into your project.

Pris

DKK 129,00

LilyTwinkle DEV-11364

LilyTwinkle DEV-11364

DEV-11364 The LilyTwinkle is a tiny little LilyPad board designed to add some twinkle to your project. Even though it’s as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it so it’s actually pretty smart! Simply sew on 4 LEDs and connect a battery and the LEDs will twinkle-fade (a lot like fireflies… or lightning...

Pris

DKK 43,00

ProtoSnap - LilyPad Development Board DEV-11262

ProtoSnap - LilyPad Development Board DEV-11262

DEV-11262 The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single board, which makes it easy to explore the possibilities of the components before snapping them apart and building them into your project.

Pris

DKK 517,00

ProtoSnap - LilyPad Development Simple DEV-11201

ProtoSnap - LilyPad Development Simple DEV-11201

DEV-11201 The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single board, which makes it easy to explore the possibilities of the components before snapping them apart and building them into your project.

Pris

DKK 431,00

LilyPad MP3 DEV-11013

LilyPad MP3 DEV-11013

DEV-11013 The LilyPad MP3 Player is your all-in-one audio solution, containing an Arduino-compatible microcontroller, MP3 (and many other formats) audio decoder chip, micro-SD card socket, and a stereo audio amplifier. Part of the Lilypad E-textiles line, this board can be used to give your fabric creations the gift of music, or any other sounds you can...

Pris

DKK 431,00

LilyPad Vibe Board DEV-11008

LilyPad Vibe Board DEV-11008

DEV-11008 Apply 5V and be shaken by this small, but powerful vibration motor. Works great as an physical indicator without notifying anyone but the wearer. This version uses a surface mount motor which is less likely to be damaged during use.

Pris

DKK 51,00

LilyPad Arduino SimpleSnap DEV-10941

LilyPad Arduino SimpleSnap DEV-10941

DEV-10941 The LilyPad SimpleSnap is a new, easy way to create e-textiles projects with LilyPad that are modular and can be disassembled or broken down, it’s also a great way to prototype! The SimpleSnap board is similar to the LilyPad Simple board, and has the same functionality except for two major differences: A built-in rechargeable Lithium Polymer...

Pris

DKK 258,00

LilyPad SimpleSnap Protoboard DEV-10940

LilyPad SimpleSnap Protoboard DEV-10940

DEV-10940 The LilyPad SimpleSnap Protoboard is a new, easy way to create e-textiles projects with LilyPad that are modular and can be disassembled or broken down, it’s also a great way to prototype! The SimpleSnap Protoboard is made to connect to the SimpleSnap main board so that the board is removable from your project for washing or so that multiple...

Pris

DKK 86,00

LilyTiny DEV-10899

LilyTiny DEV-10899

DEV-10899 The LilyTiny is a tiny little LilyPad board designed to add flashy functionality to your project without taking up a lot of room. Even though it’s as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it so it’s actually pretty smart! Simply sew on 4 LEDs and connect a battery and the LEDs will each blink...

Pris

DKK 43,00

LilyPad FTDI Basic Breakout - 5V DEV-10275

LilyPad FTDI Basic Breakout - 5V DEV-10275

DEV-10275 This is the LilyPad revision of our FTDI Basic. It is the same as our other FTDI Basic, but has a purple LilyPad board which is half the thickness.

Pris

DKK 129,00

LilyPad Arduino Simple Board DEV-10274

LilyPad Arduino Simple Board DEV-10274

DEV-10274 This is the LilyPad Arduino Simple Board. It’s controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the LilyPad Arduino Main Board, a built in power supply socket, and an on/off switch. Any of our LiPo batteries can be plugged right into the socket. The Simple board is designed to streamline your next sewable project by...

Pris

DKK 172,00
Viser 1 - 18 af 38